Brother HL-3260N User Manual page 199

☛ ☛ ☛ ☛ 11.
Push the Drum unit into the printer until it clicks into place.
☛ ☛ ☛ ☛ 12.
Remove the red sheet from the Drum unit and remove the two pieces of
tape.
☛ ☛ ☛ ☛ 13.
Close the right side cover of the printer.
✒ Note
If the Right side cover of the printer cannot be closed, it means that the
Drum unit has not been properly installed. Slide the Drum unit out and push
it into the printer again until it clicks into place.
ZAEM370E
Fig. 5-18
ZAEM410E
Fig. 5-19
ZAEM310E
Fig. 5-20
5-11
CHAPTER 5 MAINTENANCE