Brother HL-3260N User Manual page 54

✒ ✒ ✒ ✒ Note
When you set thick paper in Paper tray 2, do not stack paper above the
lower limit mark (x) of Paper tray.
☛ ☛ ☛ ☛ 1.
Change the lever on the paper size dial of the Paper tray 2 to the "Thick
paper" mode.
✒ ✒ ✒ ✒ Note
If the "Thick paper" mode is selected, the following functions using Paper
tray 2 are not available.
• Duplex print
• Sort, Shift sort
• Staple
A yellow line appears under the paper size indicator on the front of the Paper
tray.
✒ ✒ ✒ ✒ Note
Reset the lever to the left side after you have finished printing on thick paper.
✒ ✒ ✒ ✒ Note
For making settings from the printer driver,
Printer driver" in this chapter.
Fig. 1-27
ZAEY050E
Fig. 1-28
see "Settings the Media from the
1-30
ZAEY052E