Brother HL-3260N User Manual page 258

✒ Note
The factory settings are indicated by an asterisk " * " in the table above.
You can select the symbol and character sets from the FONT menu in the
HP LaserJet, EPSON FX-850, and IBM Proprinter XL emulation modes.
"Control Panel" in Chapter 3.
When you have selected the HP-GL emulation mode, you can select the
standard or alternate character set from the control panel.
Panel" in Chapter 3.
O C R S y m b
O C R S y m b
When the OCR-A or OCR-B font is selected, the corresponding symbol set
is always used.
o l S e t s
o l S e t s
Appendix–16
See
See "Control