Brother HL-3260N User Manual page 173

F i n i s h e r /
F i n i s h e r /
With this option, printed pages can be sorted or stapled. If you want to
install the Finisher/Stapler, contact your sales or service representative.
The optional Bridge unit must be installed before the Finisher/Stapler can be
used.
✒ Note
•
See "Adding Staples" in Chapter 5.
•
See "Jammed Staples" in Chapter 6.
I n s t a l l i n g t
I n s t a l l i n g t
✒ Note
If you install the Finisher, the Bridge unit must be installed first.
!
Caution
• Before installing options, the machine should be turned off and
unplugged for at least thirty minutes. Components inside the machine
become very hot, and can cause a burn injury if touched.
• When lifting the machine, use the grips on both sides. The machine
could break or cause an injury if dropped.
• It is dangerous to handle the plug with wet hands. Doing this may result
in receiving an electric shock.
• Before moving the machine, unplug the power cord from the outlet. If the
cord is unplugged abruptly, it could become damaged. Damaged plugs
or cords can cause an electrical or fire hazard.
S t a p l e r ( F
S t a p l e r ( F
h e F i n i s h e
h e F i n i s h e
S - 5 0 5 0 )
S - 5 0 5 0 )
r / S t a p l e r
r / S t a p l e r
4-50