Camera Introduction; Set Up The Camera - Reolink Argus 3 Series Operational Instruction

Camera Introduction

Battery Status LED
Micro USB Power Port
Speaker
Spotlight
Status LED
Lens
Daylight Sensor
Built-in Mic
PIR Motion Sensor
Reset Button
* Press for more than five seconds to reset
the device to factory settings.
Power Switch
Micro SD Card Slot
NOTE: Always keep the rubber plug closed firmly.
Different states of the status LED:
Red Light: WiFi connection failed
Blue Light: WiFi connection succeeded
3 English
USB
Blinking: Standby status
On: Working status

Set up the Camera

Set up the Camera using a Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
English 4