Operation - Dometic SANIPOTTIE 970 Series Instruction Manual

6 385311533
7 385311534
385311535
8 385311536
385311537
9 385311538
385311539
10 385311564
11 385320006
12 385320007

OPERATION

Prepare toilet for use
1. CAUTION! With seat lid closed, pull
flush handle to open slide valve, then push
to close. This relieves air pressure that may
be created in lower holding tank due to
changes in temperature or altitude.
2. Remove water cap and fill upper tank until it
reaches about 1 inch (25 mm) below
opening. Replace cap.
1. CAUTION! BEFORE EACH USE, with
closed, pull flush handle to open
flush button to rinse bowl. Push flush relieves air pressure that may be created
close slide valve.
Discharge spout assembly
Holding tank assembly (tan)
Holding tank assembly (gray)
Holding tank assembly (tan)
Holding tank assembly (gray)
Locking handle (tan) Locking
handle (gray)
Mounting brackets
MSD fitting
MSD fitting
lower tank. slide valve, then push to close. This
972, 974, 975, 976
2.6 gal./9.8 L - 972, 974, 974MSD
5.0 gal./18.9 L - 975, 975MSD, 976
972, 974, 974MSD, 975, 975MSD, 976
974, 974MSD, 975, 975MSD
974MSD
975MSD
3. Pull flush handle to open slide valve.
4. Pour deodorant directly into lower tank,
then close slide valve.
CAUTION! Never pour deodorant into
bowl with slide valve closed.
5. Stroke air pump about 15 times or until air
emits through relief valve on water cap.
CAUTION! Do not over-pressurize
upper tank by covering relief valve. Do
not pressurize upper tank when
disconnected from lower tank.
2. Pull flush handle to release waste into seat lid
3. Push
handle to
3