How To Use The Advanced Functions - Vivax Y-DESIGN ACP-09CH25AEYI User Manual

HOW TO USE THE ADVANCED FUNCTIONS

ECO function
NOTE: This function is only available
under COOL mode.
• Used to enter the energy efficient mode.
• Under cooling mode, press this button,
the remote controller will adjust the
temperature automatically to 24
speed of Auto to save energy(but only
if the set temperature is less than 24
If the set temperature is above 24
press the ECO button, the fan speed will
change to Auto, the set temperature will
remain unchanged.
NOTE:
• Pressing the ECO button, or modifying
the mode or adjusting the set
temperature to less than 24
ECO operation.
• Under ECO operation, the set temper-
ature should be 24
result in insufficient cooling. If you feel
uncomfortable, just press the ECO
button again to stop it.
SLEEP Function
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control.
For the detail, see "sleep operation" in
"USER' S MANUAL"
NOTE: The SLEEP function is not
available in FAN or DRY mode.
FOLLOW ME function
The Follow me function enables the
remote control to measure the
temperature at its current location and
send this signal to the air conditioner every
3 minutes interval. When using AUTO,
COOL, or HEAT modes, measuring
ambient temperature from the remote
control (instead of from the indoor unit
itself) will enable the air conditioner to
O C, fan
O C).
O C ,
O C will stop
O C or more. it may
optimize the temperature around you and
ensure maximum comfort.
Silence function
Hold down Fan speed button for 2
seconds to activate/cancel Silent mode.
Due to low frequency operation of
compressor, it may result in insufficient
cooling and heating capacity. (applicable
to the air conditioner with Silent feature
only)
O
8 C Heating Function
When the air conditioner operates under
heating mode with the set temperature of
16 O C, press Temp — button twice in one
second will activate 8 Degree heating
Hold down Fan
button for 2
seconds to
activate Silence
function
Press this button
twice in one
second to
activate 8 O C
heating function
32