Manual Operation (Without Remote) - Vivax Y-DESIGN ACP-09CH25AEYI User Manual

Manual Operation (Without Remote)

How to operate your unit without the remote control
In the event that your remote control fails to work, your unit can be operated
manually with the MANUAL CONTROL button located on the indoor unit. Note that
manual operation is not a long-term solution, and that operating the unit with your
remote control is strongly recommended.
BEFORE MANUAL OPERATION
Unit must be turned off before manual operation.
To operate your unit manually:
1. Lift the front panel of the indoor unit, and raise it until it clicks in place.
2. Locate the MANUAL CONTROL button on the right-hand side of the display box.
3. Press the MANUAL CONTROL button one time to activate FORCED AUTO
mode.
4. Press the MANUAL CONTROL button again to activate FORCED COOLING
mode.
5. Press the MANUAL CONTROL button a third time to turn the unit off.
6. Close the front panel.
CAUTION
The manual button is intended for testing purposes and emergency operation only.
Please do not use this function unless the remote control is lost and it is absolutely
necessary. To restore regular operation, use the remote control to activate the unit.
11