How To Use The Advanced Functions - Vivax ACP-12PT35AEH R290 User Manual

How to use the advanced functions

SLEEP Function
The SLEEP function is used to
decrease energy use while you
sleep (and don t need the same
temperature settings to stay
comfortable). This function can
only be activated via remote
control.
Note: The SLEEP function is
not available in FAN or
DRY mode.
SWING Function
Used to stop or start louver
movement and set the desired
up/down air flow direction. The
louver changes 6 degrees in
angle for each press(some
models without). If keep pushing
more than 2 seconds, the louver
auto swing feature is activated.
FOLLOW ME function
The FOLLOW ME function enables the
remote control to measure the temperature
at its current location. When using AUTO,
COOL, or HEAT functions, measuring
ambient temperature from the remote control
(instead of from the indoor unit itself) will
enable the air conditioner to optimize the
temperature around you and ensure
maximum comfort.
1. Press FOLLOW ME button to activate
function. The remote control will send
temperature signal to the unit every
three minutes.
2. Press FOLLOW ME button again to
turn off this function.
SHORTCUT function

Used to restore the current settings or
resume previous settings.

Push this button when remote controller is
on, the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature (if activated).

If pushing more than 2 seconds, the
system will automatically restore the
current operation settings including
operating mode, setting temperature, fan
speed level and sleep feature(if activated).
14