Names And Functions Of Indicators On Remote Controller - Vivax ACP-18CF50AERI User Manual

Names and Functions of indicators on Remote Controller

Display Panel
Fig.2
1 DIGITAL DISPLAY area: This area will show the temperature and, if in the TIMER mode, will show the ON
and OFF settings of the TIMER. It will automatically revert back to show the
temperature after 5 seconds. Under "FAN" operation mode,
nothing is shown in this area.
2 TRANSMISSION Indicator: This indicator flashes once when remote controller transmits signals to the
indoor unit
3 ON/OFF Indicator: This symbol appears when the unit is turned on by the remote controller, and disappears
when the unit is turned off.
4 OPERATION MODE Indicator: Shows the current operation modes--"AUTO", "COOL", "DRY",
"HEAT" and "FAN". HEAT only available for heat pump mode
5 FAN SPEED Indicator: Press the FAN SPEED button to select the desired fan speed setting
(Auto-Low-Med-High). You selection will be displayed in the LCD window except the Auto fan
speed.
6 LOCK Indicator: This symbol appears when press the LOCK
button, and disappears when press it again.
7 TIMER ON/OFF Display: This display area shows the settings of TIMER. That is, if only
the starting time of operation is set, it will display the TIMER ON. If only the turning off time of
operation is set, it will display the TIMER OFF. If both operations are set,
it will show TIMER ON/ OFF which indicates you have chosen to set both the starting time
and off time.
NOTE: All signs shown in the Fig.2 is for the purpose of clear presentation. But
!
during the actual operation only the re- lative functional items are shown on the display panel.