Table of Contents
Advertisement
Returns
NR3
LIST:STEP:CURRent <NR1>,<NRf+>
This command sets the current value of the nth step in the list program.
Syntax
LIST:STEP:CURRent <NR1>,<NRf+>
Arguments
<1-100>,<MINimum-MAXimum|MINimum|MAXimum>
Default value
Not applicable
Example
LIST:STEP:CURR 1,3.500
Query command
LIST:STEP:CURRent? <NR1>
Returns
NR3
LIST:STEP:SLEW <NR1>,<NRf+>
This command sets the slew rate value of the nth step in the list program.
Syntax
LIST:STEP:SLEW <NR1>,<NRf+>
Arguments
<1-100>,<MINimum-MAXimum|MINimum|MAXimum>
Default value
Not applicable
Example
LIST:STEP:SLEW 1,1.000
Query command
LIST:STEP:SLEW? <NR1>
Copyright © Itech Electronic Co., Ltd.
List Commands
52
Advertisement
Table of Contents
Need help?
Do you have a question about the IT-M3200 and is the answer not in the manual?
Questions and answers