Table of Contents
Advertisement
Default value
0
Example
CURR:UND:PROT:STAT ON
Query command
[SOURce:]CURRent:UNDer:PROTection:STATe?
Returns
0|1
[SOURce:]CURRent:UNDer:PROTection:WARM
<NRf+>
This command sets the under-current warm-up time of the power supply.
Syntax
[SOURce:]CURRent:UNDer:PROTection:WARM <NRf+>
Arguments
<0.00-30.00>
Default value
30.00S
Example
CURR:UND:PROT:WARM 10.000
Query command
[SOURce:]CURRent:UNDer:PROTection:WARM? [MINimum|MAXimum]
Returns
NR3
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>,<NRf+>
This command sets the current rising and falling slew rate of the power supply.
Syntax
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>,<NRf+>
Arguments
<0.025-9.999>,<0.025-9.999>
Copyright © Itech Electronic Co., Ltd.
Source Commands
22
Advertisement
Table of Contents
Need help?
Do you have a question about the IT-M3200 and is the answer not in the manual?
Questions and answers