ITech IT-M3200 Programming Manual page 23

DDE 3
EXE 4
CME 5
NU 6
PON 7
Status Byte Register
NU 0
NU 1
EAV 2
QUES 3
MAV 4
ESB 5
RQS/MSS 6
OPER 7
Copyright © Itech Electronic Co., Ltd.
A device-specific error, including a
8 self-test error, calibration error or other
device-specific error occurred.
16 An execution error occurred.
32 A command syntax error occurred.
not used 0 is returned.
Power has been cycled since the last
128 time the event register was read or
cleared.
not used 0 is returned.
not used 0 is returned.
4 Error buffer available.
This bit is set to 1 when any one status
8 of enabled query status register
changes.
16 Output buffer available.
Bit ESB is set to 1 when the status of
32
an enabled standard event status.
64 Register changes.
If the status of enabled operation
128 register changes, then this bit is set
to1.
Status register
2