Work Area - Power Fist 8829731 User Manual

V4.0

WORK AREA

CAUTION! Do not assemble this Portable Lumber Mill until you have read this
manual and have developed a thorough understanding of how the Portable
Lumber Mill works.
WARNING! The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that
could occur. It must be understood by the operator that common sense and
caution are factors that cannot be built into this product, but must be
supplied by the operator.
• Keep work area clean, free of clutter and well lit. Cluttered and dark work
areas can cause accidents.
•
Keep children and bystanders away while assembling the Lumber Mill
• Be alert of your surroundings. Using the Lumber Mill in confined work
areas may put you dangerously close to cutting tools and rotating parts.
ASSEMBLY
1. Insert two M8×75 bolts (#11) through the adjustment post (#12) and into
the clamp bracket (#13). Ensure that the side of the adjustment post with
measurements on it is facing away from you when assembling. Tighten the
nuts at the bottom of the clamp bracket, but leave an adequate gap for the
chainsaw bar.
Visit www.princessauto.com for more information
48 in. Portable Lumber Mill 8829731
3