Power Fist 8232274 Owner's Manual

Power Fist 8232274 Owner's Manual

Air saw
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Air Saw
8232274
Owner's manual
Read and understand all instructions before use.
Retain this manual for future reference.

Advertisement

Table of Contents
loading

Summary of Contents for Power Fist 8232274

  • Page 1 Air Saw 8232274 Owner's manual Read and understand all instructions before use. Retain this manual for future reference.
  • Page 2: Specifications

    Air Saw 8232274 Specifications Reciprocating action 2 200 strokes per minute Length of stroke 6mm - 30mm aximum operating pressure 105 PSI) Average air consumption 5 CFM ACCESSORIES 6 Metal cutting saw blades (3 – 24TPI for 65Mn, 3 – 32TPI for bi-metal)
  • Page 3: Operation

    / or damage to the work piece may occur. The Power Fist Air Saw has been designed to operate with the Power Fist Air Compressor. Take great care to ensure it’s compatibility if using it with any other air compressor.
  • Page 4: Maintenance

    Air Saw to ensure that the oil reaches the moving parts inside. Lubrication may only be done with the air hose disconnected unless it is connected to a Power Fist air filter / regulator / lubricator. After lubrication allow the oil to penetrate the moving parts of the Air Speed Saw for approximately 2 hours before reconnecting to the air line.
  • Page 5: Manuel Du Propriétaire

    Scie 8232274 Pneumatique manuel Du PrOPrIÉTaIre Vous devez lire et bien comprendre toutes les instructions avant d'utiliser l'appareil. Conservez ce manuel afin de pouvoir le consulter plus tard.
  • Page 6: Fiche Technique

    Scie 8232274 Pneumatique Fiche Technique Mouvement de va-et-vient 2 200 courses/min. Longueur de la course 6 mm - 30 mm Pression maximale de service 105 lb/po Consommation d'air 5 pi /min moyenne ACCESSOiRES 6 lames pour couper les métaux (3 à 24 dents par pouce pour 65 Mn, 3 à 32 dents par pouce pour un bimétal) 1 adapteur à...
  • Page 7 à des blessures corporelles et/ou à des dommages matériels. La scie pneumatique Power Fist a été mise au point pour fonctionner avec le compresseur d'air Power Fist. Avant de vous en servir avec un autre compresseur, vous devez vérifier sa compatibilité.
  • Page 8: Entretien

    être bien affûtées et en bon état. Vous devez employer uniquement des lames approuvées pour les scies pneumatiques Power Fist. Rappelez-vous qu'une lame de scie peut se casser ou se briser en morceaux soudainement, même si elle est utilisée correctement.

Table of Contents