Power Fist 8829731 User Manual page 5

V4.0
5. Repeat steps 3 and 4 for the nose end but do not fully tighten the
connections.
6. Attach the tie bar (#17) to the guide bar (# 19) using M8x25 bolts (#9) ,flat
washers (#7), an M8 hex nut (#6) and a coupling nut (#15).
Attach the tie and guide bar assembly to the thickness rails (#10) using 2
M8x25 bolts (#9), flat washers (#7) and coupling nuts (#15).
Attach the shield (#25) to the thickness rails (#10) using 4 M8x25 bolts
(#9), flat washers (#7) and coupling nuts (#15).
7. Attach an end bracket (#8) to the thickness rails (#10) using 2 M8x25 bolts
(#9), flat washers (#7) and M8 hex nuts (#6). Tighten the hex nuts using
fingers only. Repeat the process for the second end bracket. Ensure the end
brackets are flush with the thickness rails.
Visit www.princessauto.com for more information
48 in. Portable Lumber Mill 8829731
5