Power Fist 8829731 User Manual page 4

8829731
2. Insert two M8×75 bolts (#11) through the adjustment post (#22). Slide the
bolts through the nose guard (#14) and into the clamp bracket (#20).
Tighten the nuts at the bottom of the clamp bracket, but leave an adequate
gap for the chainsaw bar.
3. Attach the thrust end and post assembly to the end bracket using a U-clamp
(#4) post clamp (#5) two flat washers (#7) and coupling nuts (#15).
4. Align the thrust end flush with the end bracket, and then secure the handle
using M5x45 screws (#1) and lock nuts (#3).
4
48 in. Portable Lumber Mill
For technical questions call 1-800-665-8685
V4.0