Table of Contents
Advertisement
Section 3 - Controls and Indicators
Park Brake
Park Brake Switch
Park brake switch (1) controls the application and release of the park brake. Indicator light
in switch illuminates to indicate brake is applied.
• Depress switch to engage park brake. With park brake applied, transmission will not
engage forward or reverse.
• Depress switch to disengage park brake.
MACHINE ROLL-AWAY HAZARD. Always depress park brake switch to "ON" position,
lower boom to ground and stop engine before leaving cab.
CRUSH HAZARD. Turning engine off applies the park brake. Applying park brake or
turning engine off while traveling will cause unit to stop abruptly and could cause load
loss. To stop the machine in an emergency, push down the Power/Emergency Stop
Switch to shut off power and stop engine.
Parking Procedure
1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow "Shut-Down Procedure" on page 4-4.
3-4
1
ON0120
WARNING
WARNING
31211476
Advertisement
Table of Contents
