Park Brake; Parking Procedure - JLG G9-43A Operation & Safety Manual

Park Brake

BEFORE S/N 0160040675 EXCLUDING
0160040468 & 0160040672
Park brake switch controls the application and release of the park brake. Indicator
light on switch illuminates to indicate brake is applied.
• With the engine running and the park brake switch in "OFF" position (1), park
brakes are disengaged.
• With switch in "ON" position (2), park brake is engaged and transmission will not
engage forward or reverse.
MACHINE ROLL-AWAY HAZARD. Always move park brake switch to "ON"
position, lower boom to ground and stop engine before leaving cab.
CRUSH HAZARD. Turning engine off applies the park brake. Applying park brake
or turning engine off while traveling will cause unit to stop abruptly and could
cause load loss. Either may be used in an emergency situation.

Parking Procedure

1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow "Shut-Down Procedure" on page 4-5.
31200150
Section 3 - Controls and Indicators
S/N 0160040675 & AFTER INCLUDING
1
WARNING
WARNING
0160040468 & 0160040672
2
O 0123
3-9