PC or notebook. The USB 3.0 technology enables data transfer, backups, and conversions at transfer speeds of up to 5 Gbps. The DIGITUS USB 3.0 Dual SATA HDD Docking Station is downward compatible to USB 1.1, meaning that you can work with older SATA hard drives with no problem.
Page 3
MAC Requirements • Minimum Apple G processor, 64MB RAM • Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3 or above • Active USB port 4. Package Contents • DA-71540-1 HDD Docking Station • Power Adapter • User manual • USB 3.0 cable...
Page 5
Device Mode (USB3.0 to SATA External Dual Hard Drive) • Install your SATA hard drive properly to the port connector on the docking station • Connect the docking station to your computer by USB cable • Connect the power adapter to the enclosure and power up the docking station •...
Page 6
Show as below: LED Status Silkscreen 100% LED Color Green Yellow Orange Solid LED for every 25% done Duplication started incrementally Duplication in progress LED moving back and forth Duplication Complete All LED remain constantly on Note: Can’t connect the docking station to your computer by USB cable for duplicator mode.
Page 7
6. Format your Hard Drive (If the drive already appears in “My Computer”, Please skip to 6.2) 6.1 For an un-partitioned or un-formatted new drive, it normally does not automatically appear in “My Computer” the first time. Please follow these steps: Windows 2000/XP/VISTA/7/8/10 •...
Page 8
7. FAQs: Q: I can't find the drive under my computer, why? A: Please make sure your new hard disk has been partitioned. Q: After installing the drive. Why it is still recognized as “Unknown device” A: This means the driver installation is not successful, please install the driver one more time Q: Can I use external USB hub? A: Yes, USB hub works in the same way as the computer...