AJAX Hub 2 Plus User Manual page 11

Monitoring Station
Hub model
Hardware version
Firmware
ID
Rooms
Prior to linking a detector or device to a hub, create at least one room. Rooms are
used to group detectors and devices, as well as to increase the information content
of noti�cations. The name of the device and room will be displayed in the text of
the event or alarm of the security system.
central monitoring station of the security
organization:
Connected — the hub is directly connected to
the central monitoring station of the security
organization
Disconnected — the hub is not directly
connected to the central monitoring station of
the security organization
If this �eld is displayed, the security company
uses a direct connection to receive events and
security system alarms
What is a direct connection?
Hub model name
Hardware version. Unable to update
Firmware version. Can be updated remotely
ID/serial number. Also located on the device box,
on the device circuit board, and on the QR code
under the SmartBracket panel