Table of Contents
Advertisement
LINK/ACT LED
Power Supply Terminal
Communication Ports
1.3
Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RMC41:
AC or DC power cord (16 AWG)
CAT-5 Ethernet cables
Flathead screwdriver
Phillips screwdriver
4 x #8-32 screws
1.4
Decommissioning and Disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated Configuration Manual.
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
equipment. Recycling and disposal must be done in accordance with local
regulations.
RUGGEDCOM RMC41
Installation Manual, 04/2021, C79000-G8976-1010-11
Indicate the connection status of the fiber optic Ethernet ports.
Yellow (Solid)
Yellow (Blinking)
A pluggable terminal. For more information, refer to:
•
"Connecting Power (Page 9)"
•
"Power Supply Specifications (Page 17)"
Receive and transmit data. For more information about the
various ports available for the RUGGEDCOM RMC41, refer to
"Communication Ports (Page
Tools/Materials
1.3 Required Tools and Materials
State
Link is established
Port activity
13)".
For connecting power to the device.
For connecting the device to the network.
For mounting the device to a DIN rail.
For mounting the device to a panel.
For mounting the device to a panel.
Introduction
Description
Purpose
3
Advertisement
Table of Contents
