Siemens RUGGEDCOM RMC41 Installation Manual page 32

5.1.7 RoHS
This device is declared by Siemens AG to meet the requirements of the following
RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
5.1.8 Other Approvals
This device meets the requirements of the following additional standards:
•
•
5.2 EMC and Environmental Type Tests
The RUGGEDCOM RMC41 has passed the following EMC and environmental tests.
IEC 61850-3 Type Tests
61000-4-2
61000-4-3
61000-4-4
61000-4-5
RUGGEDCOM RMC41
Installation Manual, 04/2021, C79000-G8976-1010-11
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61850-3
Communications Networks and Systems for Power Utility Automation – Part 3:
General Requirements
Test
IEC ESD
IEC Radiated RFI
IEC Burst (Fast Transient)
IEC Surge
Description
Enclosure
Contact
Enclosure Air
Enclosure
Ports
Signal Ports
DC Power
Ports
AC Power
Ports
Earth
Ground Ports
Signal Ports
Certification
https://
Test Levels
± 8 kV
± 15 kV
20 V/m
± 4 kV @ 2.5 kHz
± 4 kV
± 4 kV
± 4 kV
± 4 kV Line-to-Earth,
± 2 kV Line-to-Line
5.1.7 RoHS
Severity
Levels
4
4
a
Note
a
Note
4
4
4
4
23