GE EVT-Pro 2.0 Operation And Technical Manual page 43

SECTION 29 (Continued)
EVT PRO 2.0 ® OPTIONS MENU
Standard unit settings from the
factory are in SI units. The unit
settings for each sensor can be
changed on the Category Settings
screen. Both measured units and
rounding of significant digits can be
user defined and changed.
Figure 29.4 Category Settings Screen
Back-Up Database Settings – The
software will automatically create a
back-up of the database based on
an indicated interval. The interval
can be changed here.
Only change the back-up location if
necessary.
To recover a backed-up database,
activate the Recover action button
and select the appropriate back-up
from the list.
Figure 29.5 Backup Settings Screen
®
GE/ Consolidated highly recommends that backups to the EVT PRO 2.0 database be
stored on other external drives or storage devices, in case of hard disk failure.
CONTINUED ON NEXT PAGE
® Operations and Technical Manual (Rev 1.0 – 2016)
EVT PRO 2.0 NOT FOR COPY OR DISTRIBUTION Page 39