GE EVT-Pro 2.0 Operation And Technical Manual page 35

SECTION 26 (Continued)
EVT PRO 2.0
10. Select the appropriate cylinder
11. Enter the Process Pressure.
12. Ensure there is no load on the
Testing can begin by either pressing the space bar on the keyboard or by slowly
pumping the hand pump.
® Operations and Technical Manual (Rev 1.0 – 2016)
EVT PRO 2.0
® PERFORMING A TEST
(Note: For maximum accuracy
and safety, select the cylinder
that displays the largest
utilization range.)
load cell and activate the Zero
Force action button on the test
screen.
NOT FOR COPY OR DISTRIBUTION Page 31