GE EVT-Pro 2.0 Operation And Technical Manual page 31

SECTION 25
EVT PRO 2.0
The
EVT PRO 2.0
perform in situ testing.
Required information to "build" a valve in the database:
1. Valve Serial Number
2. Functional Seat Area
3. Line / Process Pressure
4. Expected Set Pressure
It is assumed that the operator can navigate the program using the instructions provided
below. Step by step pictures of each screen is repetitive and adds unnecessary bulk to this
manual. Use the following steps to enter desired PRV data. Examples of the final data
screens are provided for clarity.
Adding a new Customer to the database: (Refer to figure 25.1)
Main Menu → Edit Database → Customers
Activate the New action [F1] button;
Enter all applicable information;
Activate the Save action [F5] button to store the data.
® Operations and Technical Manual (Rev 1.0 – 2016)
EVT PRO 2.0
®
PRV DATA ENTRY
®
software requires the entry of specific PRV data in a specific order to
Figure 25.1 Customer Menu Screen
NOT FOR COPY OR DISTRIBUTION Page 27