Switches; Select (Reset) Switch; Select Switch - Brother HL-630 User Manual

SWITCHES

This printer has the following control panel switches.
Note
This printer has no power switch. You just plug the power cord into the
AC outlet. The sleep mode feature handles all power control. For more
information on sleep mode, see "OTHER CONTROL FEATURES" in
this chapter.

SELECT (RESET) Switch

The lower switch on the control panel can work as the SELECT or
RESET switch.

SELECT Switch

The SELECT switch turns the printer on-line and off-line alternately.
When the printer is on-line, the READY lamp is on. When the printer is
off-line, the READY lamp is blinking respectively.
If you press the SELECT switch during printing, the printer immediately
stops printing even if the printer has started to print. It ejects the page,
and then enters the off-line status. Press the SELECT switch again and
the printer will print the complete page again.
Fig. 3-2 Switches on Control Panel
CHAPTER 3 CONTROL PANEL
3–3