Chapter 3 Control Panel; Lamps; Ready Lamp - Brother HL-660 Series User Manual

English
CHAPTER 3
CONTROL PANEL

LAMPS

READY Lamp

This section refers to the following lamps on the printer control panel.
Fig. 3-1 Lamps on Control Panel
Note
When the power cord is not plugged into the AC outlet or the printer is in
sleep mode, all lamps including the READY lamp are off.
The green READY lamp indicates the current status of the printer.
The printer will wake up automatically from sleep mode when data is
received, a switch is pressed, or with the power cord is plugged in.
Lamp Printer status
Off The power cord is not plugged into the AC outlet.
The printer is in the sleep mode.
Blinking The printer is warming up.
(Blinking at 0.5 seconds intervals)
Blinking The printer is off-line.
(Blinking at 1 seconds intervals)
On The printer is on-line.

CHAPTER 3 CONTROL PANEL

3–1