Table of Contents
Advertisement
English
5. Unpack the new drum unit and gently shake it from side to side five
or six times.
Fig. 5-11 Unpacking the Drum Unit
6. Remove the protective parts
Fig. 5-12 Removing the Protective Parts
Caution
Unpack a drum unit immediately before installing it into the printer.
If an unpacked drum unit is subjected to direct sunlight or room light,
the unit may be damaged.
Handle the toner cartridge and the drum unit carefully as it may
contain toner. If toner scatters and your hands or clothes get dirty,
wipe or wash it off with cold water immediately.
CHAPTER 5 MAINTENANCE
-
in order as shown below.
5–7
Advertisement
Table of Contents
