Installing The Simm - Brother HL-660 Series User Manual

English

Installing the SIMM

When you install the SIMM, follow these steps:
1 Unplug the power cord from the AC outlet and disconnect the
interface cable from the printer.
Fig. 4-3 Unplug the power cord and
Disconnect the interface cable
Note
Be sure to unplug the power cord to the printer before installing or
removing the SIMM and the main controller board.
2 Unscrew the three screws securing the rear plate of the main
controller board and pull out the main controller board.
Fig. 4-4 Remove the main controller board
CHAPTER 4 OPTIONS
4–5