Brother HL-660 Series User Manual page 57

English
5. Place the drum unit assembly in the plastic bag, hold the plastic bag
under the drum unit assembly and wrap it in the corrugated cardboard.
Fig. 5-20 Placing the Drum in the Plastic Bag
and Wrapping it in the Corrugated Cardboard
6. Close the top cover, the drum cover, the paper support wire and the
output tray.
7. Wrap the printer in the plastic bag and place it in the carton in the
Styrofoam packing.
8. Place the multi-purpose sheet feeder, documents, and drum unit
assembly in the carton as shown below.
9. Close the carton and tape it.
Manuals
Multi-Purpose
Sheet Feeder
Fig. 5-21 Repacking the Printer
CHAPTER 5 MAINTENANCE
Drum Unit
Carton
5–15