Chapter 6 Troubleshooting; Alarm Indications At A Glance; Operator Calls - Brother HL-630 User Manual

CHAPTER 6
TROUBLESHOOTING

ALARM INDICATIONS AT A GLANCE

Operator Calls

If an error occurs, the printer indicates an 'operator call' by blinking the
ALARM lamp and any of the following lamps.
Find the error and take the proper action to correct it. The printer
automatically recovers from most errors, but you may need to reset the
printer with the switches as described below.
Blinking Lamp
PAPER
ALARM
COVER
ALARM
TONER
ALARM
( every 5 seconds)
TONER
ALARM
Error
Paper jam
Paper empty
Mis Feed
Cover open
Toner low
Toner Empty

CHAPTER 6 TROUBLESHOOTING

Action
Clear the paper jam referring
to the next section "PAPER
JAMS" and press the
FF/CONT switch if the printer
does not automatically resume
printing.
Load paper in the printer
referring to Chapter 2 and
press the FF/CONT switch.
Reinstall the paper and press
the FF/CONT switch.
Close the top cover of the
printer or install the multi-
purpose sheet feeder into the
printer firmly.
Indicates that the printer has
approximately 100 pages of
printing left before the toner
cartridge is empty.
Replace the toner cartridge
with a new one.
6–1