Brother HL-630 User Manual page 52

USER'S GUIDE
Electric Plate
5–12
Warning
Use water or neutral detergents for cleaning. Cleaning with volatile
liquids such as thinners or benzene will damage the internal surfaces of
the printer.
6. Take the drum unit out of the printer and put it aside.
7. Wipe the following electric plates , ,
cotton swab. Wipe the scanner window
a soft dry cloth.
Toner Sensor
Electric Plate
Fig. 5-17 Cleaning the Printer Interior
Warning
Do not wipe the scanner window with cleaning alcohol (isophorol).
Make sure that the arrow marks on the toner cartridge are aligned with
each other before turning the drum unit upside down. See the section
"REPLACE THE TONER CARTRIDGE" in Chapter 5.
8. Turn the drum unit upside down carefully.
Caution
Handle the drum unit carefully as it contains the toner. If toner scatters
and your hands or cloths get dirty, wipe or wash it off with cold water
immidiately.
with cleaning alcohol on a
and the toner sensor
Clean Here
Electric Plate
Scanner Window
with