Table of Contents
Advertisement
ASSEMBLY
• Install the Disc Plate [C] on the Motor Shaft with the "D"- flats (FIGS 1 & 2) in
alignment and secure with the M6 x 15mm REVERSE THREAD Socket Head Cap
Screw and Internal Tooth Lockwasher using the included 5mm Hex Key (FIG 3).
• Peel off the backing to expose the adhesive, center and press the PSA Abrasive
Disc [D] in place (FIG 4).
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 1
FIG. 2
FIG. 3
Reverse
Threaded
FIG. 4
5
Advertisement
Table of Contents
