Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-820CW User Manual

5

Sending a fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in green.
The LCD shows:
FAX
Fax Resolution
Contrast
Speed-Dial
Outgoing Call
Fax Start Press
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 33.)
Contrast (See page 33.)
Speed-Dial (See page 47.)
Outgoing Call (See page 48.)
Broadcasting (See page 32.)
Delayed Fax (See page 35.)
Batch TX (See page 35.)
Real Time TX (See page 34.)
Polled TX (See page 64.)
Polling RX (See page 63.)
Overseas Mode (See page 35.)
Scan Size (See page 31.)
Set New Default (See page 35.)
30
5
09012345689
Standard
Auto
Factory Reset (See page 36.)
When the option you want is highlighted,
press OK.

Faxing from the ADF

a
Press (Fax).
b
Put the document face down in the ADF.
c
Enter the fax number using the dial pad,
Speed-Dial or Search.
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If the memory is full, the document will be
sent in real time.
5
5