Loading Envelopes - Brother MFC-820CW User Manual

Chapter 2
e
Gently put the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray
and below the maximum paper mark (1).
Make sure the paper side guides touch
the sides of the paper.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
f
Put the output paper tray back on and
push the paper tray firmly back into the
machine.
18

Loading envelopes

Use envelopes that weigh from
75 to 95 g/m
Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first.
1
To prevent possible damage to the feeding
mechanism, do not use the types of
envelopes shown below.
DO NOT USE ENVELOPES:
Glue
2
(20 to 25 lb).
CAUTION
that are of a baggy construction
that are embossed (have raised writing on
them)
that have clasps on them
that are not sharply creased
that are preprinted on the inside
Rounded Double
flap flap
2
Triangular
flap