Nomenclature; Instrument Description; Description Of Measuring Leads - HT EASYTEST COMBI519 User Manual

4. NOMENCLATURE

4.1. INSTRUMENT DESCRIPTION

The instrument checks voltage on PE by comparing the voltage at B4 input to
the ground potential induced on the instrument's side through the user's
hand. Therefore, in order to check voltage on PE, it is mandatory to hold
the instrument case on the left or on the right side.
4.2.

DESCRIPTION OF MEASURING LEADS

Fig. 1: Description of the front part of the instrument
Fig. 2: Description of the upper part of the instrument
Fig. 3: Description of measuring leads
CAPTION:
1. Inputs
2. LCD display
3. ,, , , SAVE/ENTER
4. Compartment
5. GO/STOP key
6. HELP/
7. ESC/MENU key
8. ON/OFF key
CAPTION:
1. Connector for remote switch
2. B1, B3, B4 inputs
CAUTION
CAPTION:
1. Hand protection
2. Safe area
EN - 9
EASYTEST-COMBI519
keys
connector for
cable/USB port
key
probe
of the
optical