Using The Quality Key; Using The Options Key - Brother MFC-580 Owner's Manual

Using the Quality Key

The Quality key changes the settings for copy quality (NORMAL, FAST or BEST) for the next
copy only.
Press NORMAL
Quality
and
FAST
or
BEST
1
Insert the document face down in the ADF.
2
Press Quality.
3
Press or
4
Press Mono Copy or Colour Copy—OR—Press

Using the Options Key

The Options key changes the settings for number of copies, paper type, brightness,
enlargement/reduction ratio and special copy options for the next copy only.
Press Options
NO. OF COPIES
PAPER TYPE
BRIGHTNESS
ENLARGE/REDUCE
SPECIAL
48
Chapter 10
Recommended mode for ordinary printouts. Good copy quality
with adequate copy speed.
Fast copy speed and lowest ink consumption. Use FAST to save
time (documents to be proof-read, large documents, or many
copies).
Use this mode to copy precise images such as photographs.
BEST uses the highest resolution and slowest speed.
to select the copy quality resolution, and then press Menu/Set.
Menu Selections
or
Options
NO.OF COPIES:XX
PLAIN/INK JET/
GLOSSY (4-COLOUR
or 3-COLOUR)/
TRANSPARENCY
– +
50%/78%/94%/100%/
104%/150%/200%/
MANUAL
2IN1*/OFF
*(Black and White only)
for additional settings.
Factory Setting
01
PLAIN
–
100%
OFF
+