Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1
Place the original face down in the ADF.
2
Use the dial pad to enter the number of copies you want (up to 99).
3
Press Contrast
4
Press
to make a copy lighter, or
Set.
5
Press Copy.
Using the Options Key
Use the Options key to temporarily change the copy mode (resolution),
contrast and special copy options for the next fax only. See the explanations
below the table.
Press
Options
Number of Copies
If you are using the Options key for sorting or choosing a special layout, you
can also enter the number of copies here first for convenience.
1
Place the original face down in the ADF.
2
Press Options and
OPT: # OF
COPIES, and then press
Set.
3
Use the dial pad to enter the number of
copies (up to 99).
4
Press Copy. —OR— Press
for additional settings.
11 - 4
M A K I N G C O P I E S
.
Menu Selections
OPT:# OF COPIES NO. OF COPIES:XX
OPT:STACK/SORT STACK
OPT:SPECIAL
OPT:PAPER TYPE THIN/PLAIN/
or
to select
or
to make a copy darker, and then press
Options
/
SORT
2IN1
/
4IN1
/
OFF
THICK/THICKER/
TRANSPARENCY
Factory Setting
01
STACK
OFF
PLAIN