Brother MFC-580 Owner's Manual page 44

Changing the TX Lock Password
1
Press Menu/Set, 2, 0, 1.
2
Press or
3
Press Menu/Set.
The screen prompts you to enter the old password.
4
Enter the current password.
5
Press Menu/Set.
6
Enter a 4-digit number as a new password.
7
Press Menu/Set.
The screen prompts you to re-enter the new password.
8
Enter the new password again and press Menu/Set.
9
Press Stop/Exit.
Switching TX Lock ON
1
Press Menu/Set, 2, 0, 1.
2
Press or
3
Press Menu/Set. The screen prompts you to enter the
password.
4
Enter a 4-digit password, followed by Menu/Set.
This is the same as the security password of the machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by TX LOCK MODE - TX Lock is now
switched ON.
If the password you enter at Step 4 is incorrect, the screen would display
WRONG PASSWORD. After 2 seconds the display will then return to normal
(displaying the date & time). You must then start from Step 1 to set TX Lock.
Switching OFF TX Lock
1
When TX Lock is switched ON, press Menu/Set.
2
Enter a 4-digit password and press Menu/Set.
The screen displays ACCEPTED, then after 2 seconds the display reverts to normal. TX Lock
is now switched OFF.
If the password you enter at Step 2 is incorrect, the screen would display
WRONG PASSWORD. After 2 seconds the display will then return to displaying
TX LOCK MODE. You must then start from Step 1 to switch OFF TX Lock.
If you forget the TX Lock password, please contact your Brother dealer or Brother for assistance.
36
Chapter 6
to choose SET PASSWORD.
to choose SET TX LOCK.
OLD PASSWD:XXXX
NEW PASSWD:XXXX
VERIFY:XXXX
PASSWORD:XXXX
PASSWORD:XXXX