Sending A Fax Scanning Adjustment - Brother MFC-580 Owner's Manual

2
Sending a Fax
Scanning Adjustment
Contrast
If your document is very light or very dark, you might want to set the contrast accordingly. Use
LIGHT to send a light document. Use DARK to send a dark document. After sending the document
the contrast setting is set to AUTO (suitable for most documents) automatically.
1
Insert the document face down in the ADF.
2
Press Menu/Set, 2, 2, 1.
3
Use or
4
When the screen displays your selection, press Menu/Set.
5
Press 2 if you are finished choosing settings, and go to Step 6—OR—Press 1 if you want to
select additional settings. The display returns to Setup Send menu.
6
Enter a fax number and press Mono Fax Start to send a fax.
Fax Resolution
When you have a document in the ADF, you can use the Fax Resolution key to temporarily
change the setting. Press Fax Resolution repeatedly until the LCD shows the setting you want.
—OR—
You can change the default setting.
1
Press Menu/Set, 2, 2, 2.
2
Press or
3
Press Stop/Exit.
STANDARD: Suitable for most typed documents.
FINE:
S.FINE:
PHOTO:
20
Chapter 2
to select AUTO, LIGHT, or DARK.
to select the resolution you want, and then press Menu/Set.
Good for small print; transmits a little slower than Standard resolution.
Good for small print or artwork; transmits slower than Fine resolution.
(black and white only)
Use when document has varying shades of grey; slow transmission time.
(black and white only)