Table of Contents
Advertisement
Advanced Receiving Operations
Operation from Extension Telephone
See Easy
If you answer a fax call on an extension phone or on an external phone in the
Receive
EXT. jack, you can make your MFC take over by using the Fax Receive
p. 44
Code. When you press the Fax Receive Code
See
receive a fax.
F/T Ring Time
p. 43
If the MFC answers a voice call and double-rings for you to take over, use
the Telephone Answer Code
phone.
If you answer a call, and no one is on the line, assume you're receiving a fax.
At the MFC phone, press
phone, press
displays RECEIVING) before you hang up. (Your caller will have to press
Start
For FAX/TEL Mode Only
When the MFC is in FAX/TEL mode, it will use the F/T Ring Time (double
ringing) to alert you to a voice call. If you're at the MFC, you can lift the
handset to answer.
If you're at an extension phone, you'll need to lift the handset during the
F/T Ring Time and press
on the line, or if someone wants to send you a fax, send the call back to the
MFC by pressing
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Fax
Receive Code is
If you are always disconnected when accessing your external TAD
remotely, try changing the Fax Receive Code from
and the Telephone Answer Code from
Start
, wait for fax receiving tones (chirps), then hang up. At an external
5
1
and wait for the phone to be disconnected (the screen
5
1
to send the fax.)
5
1
. The preset Telephone Answer Code is
5
1
S E T U P R E C E I V E
5
to take the call at an extension
5
1
, then hang up. At an extension phone, press
between the double rings. If no one is
5
1
.
to
5
1
, the MFC starts to
1
5
1
to
5
1
.
9
9
9
47
.
Advertisement
Table of Contents
