130
C H A P T E R F I F T E E N
If You Don't Have a CD-ROM Drive
All software is supplied on CD-ROM. If you need a Floppy Diskette version
(only Multi-Function Link Pro and Visioneer PaperPort LE are available on
Floppy Disks, item numbers DSK7131 (for Windows
DSK7195 (for Windows
Workstation Version 4.0, the software is not available on Floppy Diskette.).
You must tell the Brother Representative the version of Windows
are using and your MFC model number. To order, call Brother at 1-888-879-
3232 (USA), 1-800-668-2768 (from within Canada) or 1-514-685-6464
(from within Montreal).
Computer Requirements
The following are the minimum computer requirements you need to set up
and operate the MFC as a printer. Use only a shielded interface cable that is
IEEE-1284 compliant, and that is less than 6.5 feet (2 meters) long.
CPU
Pentium 75 or Higher
RAM
8MB or greater for Windows
8MB or greater for Windows
(16MB recommended)
16MB or greater for Windows NT
Version 4.0 (32MB recommended)
Hard Disk Drive
50MB
250MB CD-ROM 1 & 2
Operating System
Windows
DOS environment compatible with your Windows
version
®
95 or 98). If you are using Windows NT
CD-ROM 1
®
3.1, 3.11, 95, 98 or NT
®
3.1 or 3.11) and
®
®
that you
®
3.1 or 3.11
®
95 or 98
®
Workstation
®
Workstation Version 4.0,
®