Table of Contents
Advertisement
134
C H A P T E R F I F T E E N
Installing the Brother Software
Insert the Brother CD-ROM into your CD-ROM drive.
1
Enter the command for your version of Windows
2
After you insert the Brother CD-ROM, you must type the appropriate
command for your version of Windows
If you are using Windows
click File, then Run. Then type x:\SETUP.EXE. ("x" is the drive
letter for your CD-ROM drive.) This will start the Software
Installation program.
If you are using Windows
Version 4.0, the Software Installation program appears automatically
when you insert the Brother CD-ROM.
®
For Windows
95, 98 and Windows NT
also click on Start at the Desktop, select Run and then enter
x:\SETUP.EXE.
The Brother LOGO will be displayed on the screen.
If you are using Windows NT
will appear on the screen: You are running Windows NT
Brother MFL Pro does not support this version of Windows NT
MUST UPGRADE TO WINDOWS NT 4.0 AND REINSTALL MFL Pro!!
If you are using Windows NT
the Administrator, an error message will appear explaining the problem.
®
:
®
3.1 or 3.11, from the Program Manager,
®
95, 98 or Windows NT
®
Workstation Version 4.0, you can
®
3.51 or earlier, the following error message
®
Workstation 4.0 and you are not logged-in as
®
, if needed:
®
Workstation
®
3.51 or earlier.
®
. YOU
Advertisement
Table of Contents
