Remote Retrieval; Using Remote Access Code - Brother MFC 7150C Owner's Manual

R E M O T E F A X O P T I O N S ( F O R M F C 7 1 5 0 C O N L Y )

Remote Retrieval

You can call your MFC from any fax machine using touch tone, then use the
Remote Access Code and other button presses to retrieve fax messages.

Using Remote Access Code

1
2
3
4
5
6
If your MFC is set to Manual mode, you can access it by waiting about 2
minutes, then entering the Remote Access Code within 30 seconds.
Dial your MFC phone number from a fax machine using touch tone.
When your MFC answers and beeps, immediately enter your Remote
Access Code (1 5 9 ).
The MFC signals the kinds of messages received:
1 long beep — Fax message(s)
No long beeps — No messages
The MFC then prompts you with two short beeps to enter a command.
If you wait longer than 30 seconds to enter a command, the MFC hangs
up. If you enter an invalid command, the MFC beeps three times.
Press to reset the MFC when you're finished.
9 0
Hang up.
85