Table of Contents
Advertisement
Pick Mode
Specifies the ability of the reader to decode labels only
when they are close to the center of the aiming pattern,
which is the area indicated by the red cross. Pick Mode is a
Decoding and Transmission process where bar codes that
are not within the configurable distance from the center
of the aiming pattern are not acknowledged or transmit-
ted to the host. It is active only while the scanner is in Trig-
ger Single mode. If the scanner switches to a different
Read Mode, Pick Mode is automatically disabled.
NOTE: This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for more
information.
ENTER/EXIT PROGRAMMING MODE
♦ =
Default value
Multiple Label Reading
The reader offers a number of options for multiple label
reading. See the PRG or software configuration tool for
descriptions of these features and programming labels.
PICK MODE
♦
Pick Mode = Disable
Pick Mode = Enable
Operating Modes
QUICK REFERENCE GUIDE
25
Hide quick links:
Advertisement
Table of Contents
