Aiming System; Good Read Green Spot Duration - Datalogic QuickScan QD2590 Quick Reference Manual

Good Read Green Spot Duration

The aiming system will briefly switch off after the acquisi-
tion time, and if no code is decoded will switch on again
before the next acquisition. The illuminator will remain on
until the symbol is decoded.
As you read code symbols, adjust the distance at which
you are holding the reader.

Aiming System

A number of options for customizing control of the Aiming
System are available. See the QuickScan™ QD2590 PRG for
more information and programming bar codes.
GOOD READ GREEN SPOT
DURATION
Successful reading can be signaled by a good read green
spot. Use the bar codes that follow to specify the duration
of the good read pointer beam after a good read.
GOOD READ GREEN SPOT DURATION
ENTER/EXIT PROGRAMMING MODE
♦
Disabled Short (300 ms)
Medium (500 ms) Long (800 ms)
♦ =
Default value
22
QUICKSCAN™ QD2590