ICP DAS USA PEX Series User Manual page 72

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
PEX/PIO/PISO-DA Series Card
Analog Output Boards
There are about demo program given as follows:

DEMO1.EXE: D/O demo program

DEMO2.EXE: D/I/O demo program

DEMO3.EXE: Single interrupt source (initial high)

DEMO4.EXE: Single interrupt source (initial low)

DEMO5.EXE: Two interrupt source

DEMO6.EXE: Waveform generator without calibration

DEMO7.EXE: Waveform generator with calibration

DEMO8.EXE: D/A hex value output without calibration

DEMO9.EXE: D/A hex value output with calibration

DEMO10.EXE: Save EEPROM data to file

DEMO11.EXE: Download EEPROM data from file

DEMO12.EXE: User software calibration

DEMO13.EXE: Factory calibration
Note: The calibration demos programs can only be used in a DOS system.
User Manual/ Ver. 3.1/ Oct. 2013/ PMH-0010-31/ Page: 72