Electronic Fuel Injection - Volvo Penta V8-380 Operator's Manual

51773
47702842 04-2012
1 Disconnect the fuel line at the inlet fitting of the
engine's fuel pump. Connect a line from the porta-
ble tank (with storage mixture) to the fuel pump
inlet.
2 Run the engine on the storage mixture for five
minutes at 1500 RPM. This will ensure that all fuel
system and internal engine components are pro-
tected.
3 Reduce the engine speed to idle and stop the
engine.
4 Reconnect the boat fuel line to the fuel inlet fitting
and check for fuel leaks. Do not start engine.
DANGER!
Failure to inspect your work may allow fuel leakage to
go undetected. This could become a fire or explosion
hazard.

Electronic Fuel Injection

The electronic fuel injection (EFI) fuel metering system
delivers the correct amount of fuel to the engine under
all operating conditions. The EFI system is controlled
by a microprocessor, and requires no periodic mainte-
nance or adjustment. If operational problems occur,
see your Volvo Penta dealer.
Maintenance
77