Subscribe to Our Youtube Channel
Related Manuals for Volvo Penta V6-250
Summary of Contents for Volvo Penta V6-250
- Page 1 OPERATOR’S MANUAL Supplement - Water Sports Control V6-250, V6-280, V8-300, V8-350, V8-380, V8-400, V8-430...
-
Page 2: Water Sports Control
This includes subjects such as the control mechanism, fault handling, eKey, Powertrim Assistant, etc... Control of trim tabs and ballast tanks requires installation of additional equipment and may not be available on your boat. 47715209 05-2023 © AB VOLVO PENTA... -
Page 3: Water Sports Control Display
WSC program; Current boat speed. Current power trim angle. Twin applications will show both drive trim angles. Current fuel level. Current user profile that is enabled. See User Profiles later in document for complete information. 47715209 05-2023 © AB VOLVO PENTA... -
Page 4: User Profiles
After pressing save, you must select which user to overwrite. The Manage button will bring you to this screen: 47715209 05-2023 © AB VOLVO PENTA... - Page 5 See dealer for Forward (Center) ballast tank level • diagnostics and repair. (percentage) Control of the ballast pumps is disabled when using Trailer Mode and the tanks will start to empty if not already empty. 47715209 05-2023 © AB VOLVO PENTA...
-
Page 6: Trailer Mode
The target speed can be adjusted at any given time since the settings are always available from the display. When the WSC is running, it is also possible to adjust the set speed from the lever using the plus and minus buttons. 47715209 05-2023 © AB VOLVO PENTA... - Page 7 5 or WSC re‐ enabled. Move the Speed Source slider to change between Speed source and RPM source. If RPM source is chosen, the Speed Control screen will then look like below. 47715209 05-2023 © AB VOLVO PENTA...
-
Page 8: Performance Mode
If GPS speed is lost, Surf Left and Surf Right led indicators on the display will be greyed out. Surf Gates will not move with engine not running. 47715209 05-2023 © AB VOLVO PENTA... -
Page 9: Operation
Speed Source is set at RPM, the GPS (Speed) is not active and the User presets cannot be used (one parameter is Speed).To exit WSC return to idle or low speed and select WSC icon. Gray here indicates WSC is not active. 47715209 05-2023 © AB VOLVO PENTA... - Page 10 Volvo Penta of the Americas 1300 Volvo Penta Drive Chesapeake, VA 23320-9810...
Need help?
Do you have a question about the V6-250 and is the answer not in the manual?
Questions and answers